Skip to main content

Leaders Desksmart How to add New Technician Account in Leak Detection and Repair LDAR- FEMS

Add New Technician Account in Leak Detection and Repair LDAR Leaders Desksmart

Labels:

Comments

Post a Comment

Popular posts from this blog

How Work Flame Ionization Detection (FID) in TVA-1000B?

Flame Ionization Detection (FID) A Flame Ionization Detector (FID) measures organic compounds by utilizing a flame produced  by the combustion of hydrogen and air. When hydrocarbons in the sample are introduced  to the detection zone, ions are produced by the following reaction: RH + O ā†’ RHO+ + eā€“ ā†’ H2O + CO2 where R = carbon compound A collector electrode with a polarizing voltage is also located within the detector chamber, and  the ions produced by this reaction are attracted to it. As the ions migrate towards the collector, a current is produced which is directly proportional to the concentration of hydrocarbons  introduced to the flame. This current is then amplified and sent to a microprocessor and/or  analog readout device. The FID has a wide dynamic range. The effective dynamic range can be further expanded by  use of a dilutor kit which reduces very high volatile organic compounds (VOC) concentrations  to within the dynamic range (or even line...
Post a Comment
Read more

What is TVA-1000B Toxic Vapor Analyzer?

TVA-1000B Toxic Vapor Analyze The TVA-1000B Toxic Vapor Analyzer, illustrated in the figure below, is an advanced-design,  portable, organic/inorganic vapor monitor for the gas survey industry. This analyzer uses either a flame ionization detector (FID), or a photoionization detector (PID), or both types of  detectors to sample and measure concentration of gases. The vapor concentration may be read immediately on either of two displays ā€” one mounted  directly on the hand-held sample probe and the other on the instrument sidepack itself. Vapor concentration can be displayed on both displays in parts per million (ppm), parts per billion  (ppb), or percent concentration (%). The data displayed may also be collected and saved in analyzer memory and downloaded to a personal computer for analysis. Through the sidepack keyboard, you can choose the mode of operation, select concentration units for the display, set alarm thresholds, select data collection mode, and change set...
Post a Comment
Read more

SES QSTI-QSTO Test Exam Success Guide for beginner Stacks emission testing

SES QSTI-QSTO Test Exam Success Guide for beginner Stacks emission testing
Post a Comment
Read more