Skip to main content

Dual Detectors FID and PID

Dual Detectors

The benefits of each individual detector are very clear: both the FID and the PID have their advantages and disadvantages. However, with either detector alone, the number of organic and inorganic vapors that one can detect is limited by the measurement capabilities of that detector.
With the TVA-1000B, users can obtain complete information about more organic and inorganic vapors more quickly and easily than with single detector technology alone.
Since both detectors may be displayed and logged simultaneously, the relative response of the two detectors may give some clues about the identity of the compound being measured. For instance, the PID does not respond to methane at all, but the FID responds very well. A high FID reading with virtually no PID response might indicate the presence of methane. Consequently, PIDs respond very well to some inorganic gases that FIDs cannot detect. A high PID reading with no FID reading might suggest the presence of an inorganic compound. With readings from both detectors readily available, the TVA-1000B can help a user make decisions about the type of compound present and which detector reading to use.

Benefits of Dual Detectors

♦ Cost-effective packaging
♦ Detector response ratios can help characterize compounds
♦ Enhanced analytical capability derived from simultaneous detection

Comments

Popular posts from this blog

How Work Flame Ionization Detection (FID) in TVA-1000B?

Flame Ionization Detection (FID) A Flame Ionization Detector (FID) measures organic compounds by utilizing a flame produced  by the combustion of hydrogen and air. When hydrocarbons in the sample are introduced  to the detection zone, ions are produced by the following reaction: RH + O → RHO+ + e– → H2O + CO2 where R = carbon compound A collector electrode with a polarizing voltage is also located within the detector chamber, and  the ions produced by this reaction are attracted to it. As the ions migrate towards the collector, a current is produced which is directly proportional to the concentration of hydrocarbons  introduced to the flame. This current is then amplified and sent to a microprocessor and/or  analog readout device. The FID has a wide dynamic range. The effective dynamic range can be further expanded by  use of a dilutor kit which reduces very high volatile organic compounds (VOC) concentrations  to within the dynamic range (or even line...